Pebble pool resurfacing in Pinecrest, FL

Pebble is natural stone pebbles set in a cement base, the toughest finish we apply, and the longest-lasting. For a typical 500 sq ft pool it runs $5,200 to $9,800 and lasts 15 to 25 years.

The finish you resurface once and forget about

Pebble costs the most of the three finishes because it lasts the longest. The stone surface hides stains, stands up to sun and chemistry, and keeps its look for decades. The finish is textured underfoot, a natural stone feel rather than a smooth plaster one, and it comes in a range of natural colors.

If you plan to stay in the house and you want to resurface once and not think about the pool surface again for twenty years, pebble is the finish to choose.

  • Natural pebble aggregate in a cement base
  • Most durable and most stain-resistant of the three finishes
  • Typically $5,200 to $9,800 for a 500 sq ft pool
  • Lasts 15 to 25 years with regular water care
  • Best for: a pool you want to resurface once and not think about for decades

What does pool resurfacing cost?

Every pool is different, so these are typical ranges for a 500 sq ft pool in our area. They are not a quote. What moves the price is the size of the pool, the finish you choose, the condition of the shell, and the tile, coping or deck work you add.

Finish (typical 500 sq ft pool)Typical rangeHow long it lastsPer year of use
White plaster$3,000 to $5,8007 to 12 yearsabout $465
Quartz$4,500 to $8,50010 to 15 yearsabout $520
Pebble$5,200 to $9,80015 to 25 yearsabout $375

Per year of use is the middle of the price range divided by the middle of the lifespan. The Florida average resurface is about $6,500. Ranges are for a typical 500 sq ft pool and are based on published South Florida contractor pricing from 2026. Your written price comes after we inspect and measure the pool, and it covers the chip out, shell repair, bond coat, finish, refill and startup chemistry. Tile, coping and deck work are quoted with the resurface. Glass-tile renovations run higher, typically $15,000 to $50,000.

How long does it take?

A typical pool takes 4 to 7 working days from drain to refill. Here is the process, step by step.

  1. Inspect and measure

    We visit your home, measure the pool, check the shell, tile, coping and deck, and look at the water chemistry.

  2. Drain and chip out

    The pool is drained and the old finish is chipped out to the shell. Nothing gets skimmed over.

  3. Shell repair and bond coat

    Cracks and hollow spots are repaired, then a bond coat is applied so the new finish holds.

  4. Apply the finish

    White plaster, quartz or pebble is applied, along with any tile and coping work.

  5. Refill and startup chemistry

    The pool is refilled and the startup chemistry is set and balanced. We tell you when it is safe to swim.

Pool Resurfacing Pinecrest is proud to serve Florida

Why choose Pool Resurfacing Pinecrest?

Resurfacing only, done properly

We do pool resurfacing only. That focus means every job gets a careful inspection, a full chip out, shell repairs where they are needed, and a finish applied the right way.

A written price after measuring

We inspect and measure the pool before we quote, so the price you get in writing is for your pool, not a guess from a phone call.

Permits handled for you

Pool work often needs a permit from your village or city and an inspection by the county. We prepare the paperwork and meet the inspector as part of the job.

Licensed work, CPC

Florida requires pool resurfacing to be carried out by a Certified Pool/Spa Contractor (CPC). Our resurfacing work is carried out under a CPC license. Ask any pool company you hire to show its license before you sign.

Contact us today for a free estimate

Call 786-589-9026 or request a free estimate. No obligation.

Call 786-589-9026

Free, no obligation

Get a free estimateCall