Rough plaster? Stains that won't brush off?
We chip out the old finish, repair the shell and put on a new white plaster, quartz or pebble finish. Most pools are drained, refinished and refilled in 4 to 7 working days.
When a patch won't fix it any more
Many Pinecrest pools went in between the 1950s and the 1970s and have been resurfaced more than once since. When the plaster turns rough enough to scrape feet, stains stay after brushing, or the finish starts to peel, patching the same spots every year stops working. The old finish has to come out so a new one can go on.
Signs we look for
- Stains that won't brush off
- Rough plaster underfoot
- Peeling or flaking finish
- Cracks in the surface
- Water that stays cloudy when the chemistry is right
What pool resurfacing costs
Typical ranges for a 500 sq ft pool in our area. Size, finish, the condition of the shell and any tile, coping or deck work all move the price.
| Finish | Typical range | Lasts | Per year of use |
|---|---|---|---|
| White plaster | $3,000 to $5,800 | 7 to 12 years | about $465 |
| Quartz | $4,500 to $8,500 | 10 to 15 years | about $520 |
| Pebble | $5,200 to $9,800 | 15 to 25 years | about $375 |
Per year of use is the middle of the price range divided by the middle of the lifespan. The Florida average resurface is about $6,500. Glass tile renovations run higher, usually $15,000 to $50,000. Your written price covers the chip out, shell repair, bond coat, finish, refill and startup chemistry. Tile, coping and deck work are quoted with the resurface.
Drain to refill in 4 to 7 working days
- Inspect and measure
We come to the house, measure the pool and check the shell, tile, coping, deck and water.
- Drain and chip out
We drain the pool and take the old finish down to the shell. Nothing gets skimmed over.
- Shell repair and bond coat
We fix cracks and hollow spots, then apply a bond coat so the new finish holds.
- Apply the finish
White plaster, quartz or pebble goes on, along with any tile and coping work.
- Refill and startup chemistry
We refill the pool, balance the startup chemistry and tell you when it's safe to swim.
What we do while the pool is empty
Pool resurfacing
Full chip out, shell repair and a new finish.
See the jobWhite plaster
Smooth, bright and the lowest price. $3,000 to $5,800, lasts 7 to 12 years.
See the jobQuartz
Quartz mixed into the plaster for colour and a longer life. $4,500 to $8,500, lasts 10 to 15 years.
See the jobPebble
The toughest finish we put on. $5,200 to $9,800, lasts 15 to 25 years.
See the jobTile and coping
Replaced while the pool is drained, quoted with the resurface.
See the jobPool deck
A new slip-resistant surface around the pool, done during the pool work.
See the job
Why homeowners call us
Resurfacing is all we do
Every job gets the inspection, the full chip out and the shell repair it needs.
A written price after we measure
You're not working from a guess over the phone.
Permits handled
Pool work often needs a permit from your village or city and a county inspection. We prepare the paperwork and meet the inspector.
Licensed work, CPC
Florida requires pool resurfacing to be carried out by a Certified Pool/Spa Contractor (CPC). Our resurfacing work is carried out under a CPC license. Ask any pool company you hire to show its license before you sign.
Where we work
What people ask us
How much does pool resurfacing cost in Pinecrest?
For a typical 500 sq ft pool, white plaster costs $3,000 to $5,800, quartz costs $4,500 to $8,500, and pebble costs $5,200 to $9,800. The Florida average is about $6,500. The final price depends on the size of your pool, the condition of the shell, and the tile, coping or deck work you add.
How do I know my pool needs resurfacing?
Look for stains that won't brush off, plaster that feels rough underfoot, peeling or flaking finish, cracks, or water that stays cloudy even when the chemistry is right. If the plaster is rough enough to hurt feet, it's time for a resurface.
How long does resurfacing take?
A typical pool takes 4 to 7 working days from drain to refill: inspect and measure, drain and chip out, shell repair and bond coat, apply the finish, then refill and startup chemistry.
Do you need a license to resurface a pool in Florida?
Yes. Florida requires pool resurfacing to be carried out by a Certified Pool/Spa Contractor (CPC). Our resurfacing work is carried out under a CPC license.
Ready for a pool you want to swim in?
Call or ask for a free estimate. There's no obligation.
786-589-9026